Touring · 2025

BMW K 1600 B ergonomics: seat height, rider triangle & fit

The BMW K 1600 B has a 29.5 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 29.5 in
Wet weight: 758 lb
Wheelbase: 63.7 in
Power: 118 kW

Specs: ManufacturerBars & pegs: EstimatedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

89Great fit

Specs: ManufacturerBars & pegs: Estimated

Inline six · 1649 cc · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

89/100

Great fit

Knee 65°

Tighter than comfortable

Comfort 66–105°

Hip 100°

Within range

Comfort 92–122°

Elbow 144°

Within range

Comfort 120–168°

Back lean 0°

Within range

Comfort -5–18°

Ground reach

1.9 in to spare

Both feet flat, knees bent

Seat height with sag: 28.7 in
Leg length needed: 30.9 in
Your inseam + boots: 32.8 in

Wind

Turbulent air at helmet height (buffeting)

Suggested fixes

Peg lowering kit -0.6 in

Fit score 89 → 93

Find parts ↗
Taller seat +0.6 in

Fit score 89 → 93

Find parts ↗
Taller windscreen +3.9 in

Wind: Helmet sheltered behind the screen

Find parts ↗

Compare

Estimate. Handlebar and peg positions for this bike are estimated. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect balls of both feet.
Taller riders: at 6′4″, knee angle is about 59°; fit score 74/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	73	One foot flat, hips shifted	75°	4°
5′4″	29.5 in	89	Balls of both feet	71°	3°
5′7″	30.8 in	94	Both feet flat	68°	1°
5′10″	32.2 in	88	Both feet flat, knees bent	64°	0°
6′1″	33.5 in	81	Both feet flat, knees bent	62°	-2°
6′4″	35 in	74	Both feet flat, knees bent	59°	-3°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	29.5 in	Manufacturer
Seat width at the front	—	Estimated
Handlebar grip	17.7 in ahead of the seat, 10.0 in above it	Estimated
Footpeg	7.9 in ahead of the seat, 12.6 in off the ground	Estimated
Wheelbase	63.7 in	Manufacturer
Wet weight	758 lb	Manufacturer
Rake	27.8°	Manufacturer
Trail	4.2 in	Manufacturer
Engine	Inline six · 1649 cc	Manufacturer
Power	118 kW	Manufacturer
Tyres	120/70-17 / 190/55-17	Manufacturer
Category	Touring	Manufacturer