Scooter · 2025

TVS Ntorq 125 ergonomics: seat height, rider triangle & fit

The TVS Ntorq 125 has a 30.3 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 30.3 in
Wet weight: 245 lb
Wheelbase: 50.6 in
Power: 7 kW

Specs: ManufacturerBars & pegs: EstimatedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

96Great fit

Specs: ManufacturerBars & pegs: Estimated

Single · 125 cc · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

96/100

Great fit

Knee 85°

Within range

Comfort 78–125°

Hip 99°

Within range

Comfort 90–128°

Elbow 144°

Within range

Comfort 118–170°

Back lean -2°

Within range

Comfort -12–12°

Ground reach

1.2 in to spare

Both feet flat

Seat height with sag: 29.6 in
Leg length needed: 31.6 in
Your inseam + boots: 32.8 in

Wind

Clean air at your helmet, body sheltered

Suggested fixes

No changes needed for you on this bike.

Compare

Estimate. Handlebar and peg positions for this bike are estimated. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect balls of both feet.
Taller riders: at 6′4″, knee angle is about 76°; fit score 89/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	78	One foot flat, hips shifted	101°	2°
5′4″	29.5 in	89	Balls of both feet	94°	0°
5′7″	30.8 in	97	Both feet flat	89°	-1°
5′10″	32.2 in	96	Both feet flat, knees bent	84°	-2°
6′1″	33.5 in	94	Both feet flat, knees bent	80°	-3°
6′4″	35 in	89	Both feet flat, knees bent	76°	-5°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	30.3 in	Manufacturer
Seat width at the front	—	Estimated
Handlebar grip	16.9 in ahead of the seat, 9.8 in above it	Estimated
Footpeg	14.2 in ahead of the seat, 11.4 in off the ground	Estimated
Wheelbase	50.6 in	Manufacturer
Wet weight	245 lb	Manufacturer
Rake	26°	Manufacturer
Trail	3.1 in	Manufacturer
Engine	Single · 125 cc	Manufacturer
Power	7 kW	Manufacturer
Tyres	100/80-12 / 110/80-12	Manufacturer
Category	Scooter	Manufacturer