Scooter · 2025

Honda Activa e: ergonomics: seat height, rider triangle & fit

The Honda Activa e: has a 26.6 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 26.6 in
Wet weight: 262 lb
Wheelbase: 51.6 in
Power: 6 kW

Specs: ManufacturerBars & pegs: EstimatedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

74Good fit

Specs: ManufacturerBars & pegs: Estimated

Electric motor · 6 kW · 3 kWh · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

74/100

Good fit

Knee 72°

Tighter than comfortable

Comfort 78–125°

Hip 87°

Tighter than comfortable

Comfort 90–128°

Elbow 144°

Within range

Comfort 118–170°

Back lean -2°

Within range

Comfort -12–12°

Ground reach

4.9 in to spare

Both feet flat, knees bent

Seat height with sag: 25.9 in
Leg length needed: 27.9 in
Your inseam + boots: 32.8 in

Wind

Clean air at your helmet, body sheltered

Suggested fixes

Peg lowering kit -1.4 in

Fit score 74 → 88

Find parts ↗
Taller seat +1.4 in

Fit score 74 → 86

Find parts ↗
Handlebar risers +1.2 in

Fit score 74 → 77

Find parts ↗

Compare

Estimate. Handlebar and peg positions for this bike are estimated. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect both feet flat, knees bent.
Taller riders: at 6′4″, knee angle is about 65°; fit score 57/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	90	Both feet flat	85°	2°
5′4″	29.5 in	88	Both feet flat, knees bent	80°	0°
5′7″	30.8 in	81	Both feet flat, knees bent	76°	-1°
5′10″	32.2 in	72	Both feet flat, knees bent	72°	-2°
6′1″	33.5 in	64	Both feet flat, knees bent	69°	-3°
6′4″	35 in	57	Both feet flat, knees bent	65°	-5°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	26.6 in	Manufacturer
Seat width at the front	—	Estimated
Handlebar grip	16.9 in ahead of the seat, 9.8 in above it	Estimated
Footpeg	14.2 in ahead of the seat, 11.4 in off the ground	Estimated
Wheelbase	51.6 in	Manufacturer
Wet weight	262 lb	Manufacturer
Rake	26°	Manufacturer
Trail	3.1 in	Manufacturer
Engine	Electric motor · 6 kW · 3 kWh	Manufacturer
Battery	3 kWh	Manufacturer
Range	63 mi	Manufacturer
Power	6 kW	Manufacturer
Tyres	90/90-12 / 110/80-12	Manufacturer
Category	Scooter	Manufacturer