Cruiser · 2024

Ducati Diavel V4 ergonomics: seat height, rider triangle & fit

The Ducati Diavel V4 has a 31.1 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 31.1 in
Wet weight: 520 lb
Wheelbase: 62.7 in
Power: 124 kW

Specs: ManufacturerBars & pegs: EstimatedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

73Good fit

Specs: ManufacturerBars & pegs: Estimated

V4 · 1158 cc · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

73/100

Good fit

Knee 64°

Tighter than comfortable

Comfort 72–120°

Hip 99°

Within range

Comfort 85–130°

Elbow 149°

Within range

Comfort 125–176°

Back lean 10°

Within range

Comfort -12–10°

Ground reach

0.5 in to spare

Both feet flat

Seat height with sag: 30.4 in
Leg length needed: 32.3 in
Your inseam + boots: 32.8 in

Wind

Full wind on chest and helmet

Suggested fixes

Peg lowering kit -1.4 in

Fit score 73 → 85

Find parts ↗
Taller seat +0.6 in

Fit score 73 → 77

Find parts ↗
Handlebar risers +1.8 in

Fit score 73 → 77

Find parts ↗

Compare

Estimate. Handlebar and peg positions for this bike are estimated. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect one foot flat, hips shifted.
Taller riders: at 6′4″, knee angle is about 58°; fit score 65/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	51	Tiptoes on one foot	75°	16°
5′4″	29.5 in	64	One foot flat, hips shifted	70°	13°
5′7″	30.8 in	70	Balls of both feet	67°	11°
5′10″	32.2 in	72	Both feet flat	64°	10°
6′1″	33.5 in	67	Both feet flat, knees bent	61°	8°
6′4″	35 in	65	Both feet flat, knees bent	58°	7°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	31.1 in	Manufacturer
Seat width at the front	12.6 in	Estimated
Handlebar grip	20.9 in ahead of the seat, 8.7 in above it	Estimated
Footpeg	5.1 in ahead of the seat, 13.4 in off the ground	Estimated
Wheelbase	62.7 in	Manufacturer
Wet weight	520 lb	Manufacturer
Rake	26°	Manufacturer
Trail	4.4 in	Manufacturer
Engine	V4 · 1158 cc	Manufacturer
Power	124 kW	Manufacturer
Tyres	120/70-17 / 240/45-17	Manufacturer
Category	Cruiser	Manufacturer