Naked · 2025

Honda Grom (MSX125) ergonomics: seat height, rider triangle & fit

The Honda Grom (MSX125) has a 30.0 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 30.0 in
Wet weight: 225 lb
Wheelbase: 47.2 in
Power: 7.2 kW

Specs: ManufacturerBars & pegs: EstimatedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

81Good fit

Specs: ManufacturerBars & pegs: Estimated

Single · 124 cc · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

81/100

Good fit

Knee 60°

Tighter than comfortable

Comfort 66–100°

Hip 104°

Within range

Comfort 88–118°

Elbow 139°

Within range

Comfort 118–165°

Back lean 5°

Within range

Comfort -3–22°

Ground reach

2.0 in to spare

Both feet flat, knees bent

Seat height with sag: 29.1 in
Leg length needed: 30.8 in
Your inseam + boots: 32.8 in

Wind

Full wind on chest and helmet

Suggested fixes

Peg lowering kit -0.6 in

Fit score 81 → 86

Find parts ↗
Taller seat +0.6 in

Fit score 81 → 86

Find parts ↗

Compare

Estimate. Handlebar and peg positions for this bike are estimated. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect balls of both feet.
Taller riders: at 6′4″, knee angle is about 55°; fit score 68/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	82	One foot flat, hips shifted	69°	10°
5′4″	29.5 in	90	Balls of both feet	66°	7°
5′7″	30.8 in	87	Both feet flat	63°	6°
5′10″	32.2 in	80	Both feet flat, knees bent	60°	5°
6′1″	33.5 in	74	Both feet flat, knees bent	57°	3°
6′4″	35 in	68	Both feet flat, knees bent	55°	2°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	30.0 in	Manufacturer
Seat width at the front	—	Estimated
Handlebar grip	18.5 in ahead of the seat, 9.3 in above it	Estimated
Footpeg	4.1 in ahead of the seat, 13.2 in off the ground	Estimated
Wheelbase	47.2 in	Manufacturer
Wet weight	225 lb	Manufacturer
Rake	25°	Manufacturer
Trail	3.3 in	Manufacturer
Engine	Single · 124 cc	Manufacturer
Power	7.2 kW	Manufacturer
Tyres	120/70-12 / 130/70-12	Manufacturer
Category	Naked	Manufacturer