Adventure · 2018

Benelli TRK 502X ergonomics: seat height, rider triangle & fit

The Benelli TRK 502X has a 33.1 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 33.1 in
Wet weight: 518 lb
Wheelbase: 59.3 in
Power: 35 kW

Specs: ManufacturerBars & pegs: EstimatedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

82Good fit

Specs: ManufacturerBars & pegs: Estimated

Parallel twin (180°) · 500 cc · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

82/100

Good fit

Knee 65°

Tighter than comfortable

Comfort 66–105°

Hip 112°

Within range

Comfort 92–122°

Elbow 140°

Within range

Comfort 118–165°

Back lean -2°

Within range

Comfort -6–16°

Ground reach

0.8 in short of flat feet

Balls of both feet

Seat height with sag: 31.8 in
Leg length needed: 33.6 in
Your inseam + boots: 32.8 in

Standing on the pegs

Bars 1.7 in too low for standing

Wind

Turbulent air at helmet height (buffeting)

Suggested fixes

Lowering links -0.8 in

Fit score 82 → 88

Find parts ↗
Boots with a thicker sole +0.8 in

Fit score 82 → 86

Find parts ↗
Peg lowering kit -0.6 in

Fit score 82 → 85

Find parts ↗

Lowering changes handling and side-stand lean; check with a specialist.

Compare

Estimate. Handlebar and peg positions for this bike are estimated. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect tiptoes on one foot.
Taller riders: at 6′4″, knee angle is about 59°; fit score 75/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	53	Feet don’t reach the ground	75°	3°
5′4″	29.5 in	64	Tiptoes on one foot	71°	1°
5′7″	30.8 in	74	One foot flat, hips shifted	68°	-1°
5′10″	32.2 in	83	Balls of both feet	64°	-2°
6′1″	33.5 in	82	Both feet flat	62°	-3°
6′4″	35 in	75	Both feet flat, knees bent	59°	-5°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	33.1 in	Manufacturer
Seat width at the front	—	Estimated
Handlebar grip	17.3 in ahead of the seat, 11.2 in above it	Estimated
Footpeg	4.7 in ahead of the seat, 15.2 in off the ground	Estimated
Wheelbase	59.3 in	Manufacturer
Wet weight	518 lb	Manufacturer
Rake	26°	Manufacturer
Trail	4.7 in	Manufacturer
Engine	Parallel twin (180°) · 500 cc	Manufacturer
Power	35 kW	Manufacturer
Tyres	110/80-19 / 150/70-17	Manufacturer
Category	Adventure	Manufacturer